The L1® Cranium System is used for the treatment of fractures, fixation of osteotomies and bone flaps as well as in the context of reconstructive procedures in the area of the cranial cap.
Titanium implants for use in craniomaxillofacial osteosynthesis
Titanium implants for use in craniomaxillofacial osteosynthesis
Level One Fixation Low Profile Neuro - Titanium implants for use in Neurosurgery
Pre-contoured titanium mesh implants for use in cranial osteosynthesis
For the simple and stable fixation of cranial bone flaps and fractures
SonicWeld Rx® is a revolutionary technique for use in craniomaxillofacial osteosynthesis.
Patient brochure SonicWeld Rx® | The perfect choice − for you and your child
SonicWeld Rx® | Quick Guide | Set-up
SonicWeld Rx® | Quick Guide | What do I need for an operation? Which components need to be sterilized?
Cranial springs for the minimally invasive treatment of sagittal craniosynostoses
Devices for use in correction of craniofacial malformations
Devices for use in correction of craniofacial malformations
Devices for use in correction of craniofacial malformations
Specialist disciplines require special tools. Our established CMF instruments have been developed by renowned maxillofacial surgeons. A constant dialog with leading specialists helps us to maintain continuous progress in our product portfolio. In addition, all of our instruments are manufactured to the highest quality standards and are designed to meet the most exacting demands.
With your BOS tools you have a full-fledged and universally applicable screwdriver and drill system at your fingertips. The battery powered tools do not require a charger or base unit and are always ready – wherever and whenever you need them. Inserting and removing screws becomes a matter of seconds.
The KLS Martin universal screw removal system provides a handle and 16 interchangeable screwdriver blades in one compact kit allowing the easy removal of virtually any common cranio-maxillofacial osteosynthesis screw.
Titanium implants for use in craniomaxillofacial osteosynthesis
Titanium implants for use in craniomaxillofacial osteosynthesis
Titanium implants for use in maxillofacial osteosynthesis
Anatomically preformed plates for simple and stable fixation of orbital defects
SonicWeld Rx® is a revolutionary technique for use in craniomaxillofacial osteosynthesis.
Videos
Brochures
Patient brochure SonicWeld Rx® | The perfect choice − for you and your child
SonicWeld Rx® | Quick Guide | Set-up
SonicWeld Rx® | Quick Guide | What do I need for an operation? Which components need to be sterilized?
External device for use in correction of craniomaxillofacial malformations
Devices for use in correction of craniomaxillofacial malformations
Devices for use in correction of craniomaxillofacial malformations
Devices for use in correction of craniomaxillofacial malformations
Devices for use in correction of craniomaxillofacial malformations
Devices for distraction of the alveolar ridge
Devices for transverse palatinal distraction
Devices for transverse palatinal distraction
Devices for use in correction of craniofacial malformations
Devices for use in correction of craniofacial malformations
Specialist disciplines require special tools. Our established CMF instruments have been developed by renowned maxillofacial surgeons. A constant dialog with leading specialists helps us to maintain continuous progress in our product portfolio. In addition, all of our instruments are manufactured to the highest quality standards and are designed to meet the most exacting demands.
In osteosynthesis the transoral access has become ever more important. Miniaturized instruments especially developed for this indication are indispensable. The KLS Martin Angulus 2 angled screwdriver is a useful tool, allowing the surgeon to implant screws, plates, and distractors under the most constricted spatial conditions and without visible scarring. Specially configured storage trays help sustain the value of the angled screwdriver. They ensure clear and gentle storage and facilitate the appropriate sterilization of all system components.
The KLS Martin Bone Graft Kit is a compact set including everything you need for optimum fixation of bone grafts during reconstructive, preprosthetic procedures in cranio-maxillofacial osteosynthesis.
With your BOS tools you have a full-fledged and universally applicable screwdriver and drill system at your fingertips. The battery powered tools do not require a charger or base unit and are always ready – wherever and whenever you need them. Inserting and removing screws becomes a matter of seconds.
The KLS Martin Transbuccal System is a compact kit including all necessary devices to facilitate the transbuccal approach.
The KLS Martin universal screw removal system provides a handle and 16 interchangeable screwdriver blades in one compact kit allowing the easy removal of virtually any common cranio-maxillofacial osteosynthesis screw.
Titanium implants for use in craniomaxillofacial osteosynthesis.
Titanium implants for use in craniomaxillofacial osteosynthesis
Multidirectional Locking Plate System for use in craniomaxillofacial osteosynthesis
Resection guides and mini implants for mandibular reconstruction with fibula graft
Three-dimensional titanium implants for optimal treatment of condylar fractures
Resorbable implants for oral and dental bone augmentation
SonicWeld Rx® | The perfect choice − for you and your child.
Devices for distraction of the alveolar ridge
Devices for use in correction of mandibular malformations
Devices for use in correction of mandibular malformations
Devices for use in correction of mandibular malformations
Devices for use in correction of mandibular malformations
Devices for use in correction of mandibular malformations
Devices for use in correction of mandibular malformations
Bidirectional Devices for use in correction of mandibular malformations
Bidirectional Devices for use in correction of mandibular malformations
Devices for transport distraction of the condylar head
Devices for mandibular transport distraction
Devices for mandibular transport distraction
Devices for transversal mandibular distraction
Devices for transversal mandibular distraction
External device for use in correction of mandibular malformations
External devices for use in correction of mandibular malformations
Specialist disciplines require special tools. Our established CMF instruments have been developed by renowned maxillofacial surgeons. A constant dialog with leading specialists helps us to maintain continuous progress in our product portfolio. In addition, all of our instruments are manufactured to the highest quality standards and are designed to meet the most exacting demands.
Doctors worldwide use them and place their trust in them: quality instruments by KLS Martin, continually setting standards in the worlds of surgery and dental surgery. Our surgical instruments – over 12,500 in number – are developed and manufactured in compliance with the most stringent quality requirements, from the initial selection of corrosion-resistant chrome steel and the manufacturing and heat treatment right through to the final finish, inspection and testing. Our products are designed to consistently meet high demands for application-oriented functionality, intelligent operation and top quality.
The KLS Martin Transbuccal System is a compact kit including all necessary devices to facilitate the transbuccal approach.
Special instruments for the endoscopic restoration of fractures of the temporomandibular joint
Temporomandibular joint surgery has received major impulses during the past 20 years, for example, the introduction of functionally stable osteosynthesis techniques such as the mini-plate and the tension screw. Depending on the localization of the fracture - diacapitular fractures, joint neck fractures and joint base fractures - the developed access methods are continuously advanced further. The support of endoscopes is gaining increased importance in this area. The access techniques are becoming minimally invasive and at the same time safer for the patient, but more elaborate and technically demanding for the surgeon. The specifically developed instruments of the Endo-Condyle Unit offer a number of options for repositioning the dislocated fragment of the temporomandibular joint. In combination with our osteosynthesis plates they round off our portfolio for the restoration of temporomandibular fractures.
In osteosynthesis the transoral access has become ever more important. Miniaturized instruments especially developed for this indication are indispensable. The KLS Martin Angulus 2 angled screwdriver is a useful tool, allowing the surgeon to implant screws, plates, and distractors under the most constricted spatial conditions and without visible scarring. Specially configured storage trays help sustain the value of the angled screwdriver. They ensure clear and gentle storage and facilitate the appropriate sterilization of all system components.
The KLS Martin Bone Graft Kit is a compact set including everything you need for optimum fixation of bone grafts during reconstructive, preprosthetic procedures in cranio-maxillofacial osteosynthesis.
With your BOS tools you have a full-fledged and universally applicable screwdriver and drill system at your fingertips. The battery powered tools do not require a charger or base unit and are always ready – wherever and whenever you need them. Inserting and removing screws becomes a matter of seconds.
The KLS Martin universal screw removal system provides a handle and 16 interchangeable screwdriver blades in one compact kit allowing the easy removal of virtually any common cranio-maxillofacial osteosynthesis screw.
The handy and ergonomic bone mill MBM is used for manual preparation of autologous bone grafts from cancellous/compact bone. Due to the very effective and easy-operating cutting cylinder available in three different sizes, an optimal result can be achieved even with small quantities of bone.
The newly developed, patented KLS Martin hook-type sinus retractor according to Lindorf offers a completely new working method for sinus lift procedures: it is now possible to keep the cheek soft tissues and the mucosal flap securely out of the way with a single instrument. This gives the surgeon a significantly better overview of the surgical site and ensures contamination-free placement of the augmentation material. Besides, a single assistant is sufficient for the entire intervention.
Titanium implants for use in craniomaxillofacial osteosynthesis
Titanium implants for use in craniomaxillofacial osteosynthesis
Arnett FAB Orthognathic System - Titanium implants and instruments for use in orthognathic surgery
To support accurate mandibular advancement or setback following bilateral sagittal split osteotomy (BSSO)
Devices for transverse palatinal distraction
Devices for transverse palatinal distraction
Devices for transversal mandibular distraction
Devices for transversal mandibular distraction
The Solution for Minimally Invasive Orthognathic Surgery
Without a doubt, William Arnett is a pioneer in orthognathic surgery. His FAB concept (Face, Airway, Bite) has raised the systematic diagnostics of orthognathic patients to a new level. The concept is followed in numerous countries worldwide. It is therefore logical that Dr. Arnett does not make compromises in his choice of instruments, but adheres strictly to his concept: from retractors and dissectors through to the raspatories, all the instruments are optimized and matched for their intended purpose in painstaking details.
Today, the bilateral sagittal split osteotomy of the mandible is a routine procedure in orthognathic surgery. High time to optimize the corresponding retractors: in cooperation with Prof. Lindorf, KLS Martin has developed a concept based solely on two modified retractors:
Safe and space-saving work with a perfect view is made possible with the aid of these two hooks. The anchoring mandrel reliably prevents any unintended slipping in the situs.
Orthognathic corrective osteotomies require their own highly specific instruments. What began with Hugo Obwegeser (CH Zurich) has meanwhile been advanced and modified consistently: hooks, raspatories, elevators, mobilizers, chisels and osteotomes, which have all been optimized for their specific applications.
The KLS Martin Transbuccal System is a compact kit including all necessary devices to facilitate the transbuccal approach.
In osteosynthesis the transoral access has become ever more important. Miniaturized instruments especially developed for this indication are indispensable. The KLS Martin Angulus 2 angled screwdriver is a useful tool, allowing the surgeon to implant screws, plates, and distractors under the most constricted spatial conditions and without visible scarring. Specially configured storage trays help sustain the value of the angled screwdriver. They ensure clear and gentle storage and facilitate the appropriate sterilization of all system components.
Developed together with Prof. Dr. Nasser Nadjmi, Antwerp, Belgium
Patient-specific implants for use in craniomaxillofacial surgery
Patient-specific distractors for use in craniomaxillofacial surgery
The web-based platform and app for surgeons and their staff. It guides and accompanies you through the whole process of requesting, designing and finalizing patient-specific implants in a safe and efficient way.
Intuitive software for planning and simulating surgical procedures based on individual patient data
The use of innovative technologies opens up new options in patient-specific treatment. State-of-the-art simulation technologies permit us to offer aids for optimized diagnosis and therapy.
With IPS inSilico® we enable solutions for the computer-based simulation of surgical procedures, supporting diagnosis and therapy planning as well as the virtual testing of our implants. Aided by simulations, we are creating a world here in which we can make diagnoses and predict the success of therapies. In this process, we apply technologies that have been standard in other industries for decades.
Installation instructions for web apps